370HP Photos / Your Dredge Project / 370HP Dredger Animation
TECHNICAL DATA AND SPECIFICATIONS |
Portable Dredge for any standard 10" or 12" (245-305 mm) pipeline
Nominal pump capacity range = up to 320 yds3/hr (245 m3/hr)
ELLICOTT® DREDGES, POWER-PACKED PORTABILITY
This portable dredge represents a revolutionary breakthrough in dredge design and construction. Adaptation of the hull, ladder, and spud extensions for various digging depths added to the modular design concept of the "DRAGON®" Series provides the most efficient and flexible dredging equipment on the market. Tailored to suit your company's requirements, this dredge will give the greatest return on your investment dollar.
Principal Dimensions and Particulars
Specifications
Calculated Production Curve
Representative digging depths and dimensions for average dredging service. Configurations for deeper digging readily available - consult Ellicott®.
Printer Friendly Version
370HP Principal Dimensions and Particulars |
|
|
Metric |
English |
GENERAL |
Hull Length |
10.98 m |
36 ft. |
Hull Width |
3.66 m |
12 ft. |
Hull Depth |
1.22 m |
4 ft. |
Length Overall |
17.53 m |
57.5 ft. |
Height Overall (spuds installed and elevated) |
8.88 m |
29.13 ft. |
Height Overall (Spuds, spud hoists, and muffler
removed) |
3.2 m |
10.7 ft. |
Draft - Max. with spuds and ladder raised |
.81 m |
2.67 ft. |
Fuel Storage Capacity |
3050 L |
800 gals. |
Approximate Weight - Lt. and Dry |
25,396 kg |
56,000 lbs. |
DIGGING
DEPTH |
Maximum (*) |
6.10 m |
20 ft. |
Minimum |
0.9 m |
3 ft. |
CHANNEL
WIDTH |
Maximum @ 40'
Swing each side CL |
@Min. Digging Depth |
22.25 m |
73 ft. |
@ Max. Digging Depth |
18.29 m |
60 ft. |
Minimum @ Minimum Digging Depth
(Hull Grounded) |
9.3 m |
30.5 ft. |
PRIME
MOVER |
Caterpillar Diesel Engine
Choice of models available:
CAT 3406
CAT C15
|
306 kw
328 kw |
410 HP
440 HP |
CUTTER |
Shaft Power |
30 kw |
40 SHP |
Cutting Force |
1,815 kg |
4000 lbs |
Cutting Force per Linear Inch of Edge |
29 kg |
64 lbs. |
Cutter Speed |
0 - 39 RPM |
Cutter Diameter |
800 mm |
31.5 in |
SWING
WINCHES |
Shaft Power |
15.4 kw |
20.6 HP |
Line Pull - First Layer |
3,629 kg |
8000 lbs |
Line Speed - First Layer |
0-22.8 m/min |
0-75 ft/min |
Wire Size |
12.7 mm |
1/2 in |
Drum Capacity |
61 m |
200 ft. |
(*) Deeper digging depths available upon request. Please consult Ellicott®.
OPTIONAL EQUIPMENT
Choice of cutters, pump handling equipment, air conditioning or heating, anchor booms, production measuring equipment, and pipeline components.
ELLICOTT® reserves the right to modify equipment in order to provide for engineering improvements.
| Specifications - "DRAGON®" Model Series 370HP |
HULL - One piece welded steel construction with ladder well forward. Built in fuel, hydraulic oil and ballast tanks. Hull shell plate and stiffeners designed to ABS river rules.
MAIN DREDGE PUMP UNIT - V belt driven by radiator cooled Caterpillar diesel engine with electric starter. Totally enclosed anti-friction radial and thrust bearings with impeller mounted on Acme threads. All wearing parts 500 BHN minimum chrome alloy cast iron. Choice of 10" or 12" (254 mm or 304 mm) discharge pipeline diameters.
HYDRAULIC POWER PACKAGE - Triple section hydraulic gear pump direct driven off the main engine. Hydraulic system includes three independent operating circuits; one for swing winch, one for cutter, and one for spud and ladder hoist.
EXCAVATING MODULE AND LADDER - Cutter direct driven by gear type hydraulic motor. Spline connected to planetary reduction gear. Maximum cutter force available at all speeds. Underwater excavating module features short drive shaft with weight concentrated at the cutter for efficiency.
LADDER HOIST - Double acting hydraulic cylinder. Ram cylinder operation provides crowding action for tough digging.
POWER SWING WINCHES - Individual single direct line winches direct-driven by gear-type hydraulic motors through planetary reduction gear. Speed and reverse controls at operator's console. Heavy-duty hydraulic system provides constant line pull at variable speeds.
ELECTRICAL SYSTEM - 24 volt DC internal/external lighting and electrical system is powered by main diesel engine.
SPUDS AND SPUD HOIST - Heavy wall, cylindrical steel spuds mounted in spud keepers at stern. Spuds are hoisted by vertical hydraulic cylinder and choker sling arrangement.
ASSEMBLY AND TRANSPORTATION - Can be accomplished in 1 day provided all tools, site preparations and personnel are available. The assembled Series 370HP can be transported on one truck with the spuds stowed on deck.
WARRANTY - Ellicott® warrants its equipment only in accordance with the printed warranty conditions which are normally included in our sales proposals, the latest copy of which will be forwarded promptly on written request. No other warranties are provided.
| Calculated Production Curve |
" DRAGON®" Model Series 370HP Using 12" Floating Pipeline
(enlargement)
Note: Calculated output curves indicate pumping capability only. In actual practice the material varies from free flowing, easily excavated material to compacted and/or difficult excavations. When used for estimating actual outputs, the nature of the material must be considered. Consult Ellicott® for other dredging conditions outside these curves.
BASED UPON |
| MATERIAL IN-SITU S.G. |
2.10 |
| SUCTION PIPE I.D. |
12 in. (305 mm) |
| HULL DISCHARGE PIPE I.D. |
10 in. (245 mm) |
| FLOATING DISCHARGE PIPE I.D. |
12 in. (305 mm) |
| PUMP IMPELLER |
27 in. (686mm) |
| MAX. RPM |
845 RPM |
| MAX. PUMP POWER |
(320SHP/239kW) |
| TERMINAL ELEV. |
10 ft. (3.05 M) |
For material in-situ values other than 2.1, see conversion below.
CONVERSION FOR VARIOUS
IN-SITU S.G. |
| S.G. |
MULTIPLIER |
| 2.10 |
1.00 |
| 2.00 |
1.10 |
| 1.95 |
1.158 |
| 1.90 |
1.222 |
| 1.85 |
1.294 |
| 1.80 |
1.375 |
| 
