SERIES 1170 "DRAGON" DREDGE - TECHNICAL DATA AND SPECIFICATIONS

TECHNICAL DATA AND SPECIFICATIONS
1170 Series "DRAGON" Model Specifications
Portable Dredge for any standard 14" or 16" (356-406 mm) pipeline. Nominal pump capacity range = 150-700 yds³/hr (610 m³/hr)

ELLICOTT DREDGES, POWER-PACKED PORTABILITY
The "Value Engineered" Series 1170: Design criteria focused on dependability and low cost with rapid dismantling, mobility, reassembling and start-up; minimizing downtime and ensuring high productivity.

Representative digging depths and dimensions for average dredging service. Configurations for deeper digging readily available - consult Ellicott.

1170 Principal Dimensions and Particulars
			Metric	English
GENERAL	Hull Length 33 ft (10 m) digging depth		16.5 m	54 ft.
	Hull Width		7.0 m	23.0 ft
	Ladder Length 33 ft (10 m) digging depth		13.1m	43 ft.
	Hull Depth		1.37 m	4.5 ft.
	Dry Weight (approximate)		81,630 kg	180,000 lbs.
	Mean operating draft		0.86 m	2.83 ft
	Center Tank Weight (complete with machinery)		40,824 kg	90,000 lbs.
	Fuel Storage Capacity		12,490 L	3,300 gal
DIGGING DEPTH	Maximum		10 m	33 ft.
	Minimum		1.2 m	4 ft.
CHANNEL WIDTH	Maximum @ 40° Swing each side CL	@ Min. Digging Depth	31.7 m	104 ft.
		@ Max. (33 ft/10 m) Digging Depth	27.13 m	89 ft.
	Minimum @ Min. Digging Depth (with hull grounded)		18.3 m	60 ft.
PRIME MOVERS	Diesel Engine CAT3508 (Continuous Rating)		638 kw	855 HP
	Diesel Engine CAT3406 (Intermittent Rating)		216 kw	290 SHP
	TOTAL		854 kw	1145 SHP
CUTTER	Cutting Power		116 kw	155 SHP
	Cutting Force		4055 kg	8,940 lbs
	Cutting Diameter		1099 mm	43.27 in
	Cutter Shaft Diameter		133 mm	5.24 in
	Cutter Speed Range		29-48 RPM
DIRECT LINE SWING WINCHES	Shaft Power		36.5 kw	49 HP
	Line Pull - First Layer		6,804 kg	15,000 lbs
	Line Speed - First Layer		0-31.5 m/min	0-103 ft/min
	Wire Size		15.9 mm	5/8 in
	Drum Capacity		122 m	400 ft.
SPUD WINCHES AND SPUDS	Shaft Power		23.9 kw	32 HP
	Line Pull		7,800 kg	17,200 lbs
	Line Speed		14.6 m/min	48 ft/min
	Wire Size		19 mm	3/4 in
	Spud Length (33 ft (10 m) DD		14.3 m	47 ft
	Spud Outside Diameter		457 mm	18 in
	Spud Weight		3,084 kg	6,800 lb

OPTIONAL EQUIPMENT
Accessories and options offered include choice of cutters, pump handling equipment, air conditioning or heating, production measuring equipment, and pipeline components.

ELLICOTT reserves the right to modify equipment in order to provide engineering improvements.

SPECIFICATIONS - "DRAGON" MODEL SERIES 1170

HULL - Three tank design: quick connect/disconnect assembly; machinery in unitized center tank. Outboard pontoons for flotation, ballast and fuel storage. Hull bottom plate is 0.31 inch (7.9 mm), side plate 0.25 inch (6.35 mm) reinforcing up to 3/4 inch (19 mm); all of A36 or equal steel. Deckhouse integral with center tank structure.

DIRECT-DRIVE CLOSE COUPLED PUMP UNIT - Close-coupled unit, totally enclosed radial and thrust bearings on reduction gear shaft with ACME threads for impeller mounting. Pump case, impeller, liners and throat piece are cast of special 500 BHN chrome carbide abrasion resistant iron. Driven by heat exchanger cooled Caterpillar diesel engine with electric starting. Choice of 14 inch or 16 inch (356 mm or 406 mm) discharge pipe diameters.

HYDRAULIC POWER PACKAGE - Three hydraulic pumps are direct driven by a Caterpillar auxiliary diesel engine. Hydraulic system includes four independent operating circuits; one for cutter, one for swing winch, one for ladder hoist, and one for spud winches and control pressure. The engine, hydraulic pumps, gears, cooler and reservoir are all mounted on a common base.

EXCAVATING MODULE AND LADDER - Cutter driven by slow speed, radial piston hydraulic motor. Maximum cutter force available at all speeds. Underwater excavating module features short drive shaft with weight concentrated at the cutter for efficiency. Cutter can be angled down for shallow digging. Excavating module drive recessed inside ladder tube for protection.

LADDER HOIST - Double acting hydraulic cylinder. Ram cylinder operation provides crowding action for tough digging.

SWING WINCHES - Individual single, direct line winches, direct-driven by radial piston hydraulic motors, mounted on the aft end of the ladder. Speed and reverse controls at operator's console.

ELECTRICAL SYSTEM - 24 volt DC internal/external lighting and electrical system is powered by auxiliary diesel engine.

SPUD AND SPUD WINCHES - Two heavy wall, cylindrical steel spuds mounted in spud keepers at stern. Spuds designed for single-part wire rope bottom lift, and are raised or lowered by individual single drum winches with free-fall clutches.

WARRANTY - Ellicott warrants its equipment only in accordance with the printed warranty conditions which are normally included in our sales proposals, the latest copy of which will be forwarded promptly on written request. No other warranties are provided

Calculated Output Curve - " DRAGON" Model Series 1170 - 16" I.D. Pipeline
(enlargement)

Note: Calculated output curves indicate pumping capability only. In actual practice the material varies from free flowing, easily excavated material to compacted and/or difficult excavations. When used for estimating actual outputs, the nature of the material and job conditions must be considered. Consult Ellicott for other dredging conditions outside these curves.

BASED UPON
MATERIAL IN-SITU S.G.	2.10
SUCTION PIPE I.D.	16 in (406 mm)
DISCHARGE PIPELINE I.D.	16 in (406 mm)
PUMP IMPELLER	38 in (965 mm)
MAX. PUMP SPEED	654 RPM
MAX. PUMP HP	855 HP (638 kw)
TERMINAL ELEV.	10 ft (3.05 m)

CONVERSION FOR VARIOUS IN-SITU S.G.
S.G.	MULTIPLIER
2.10	1.00
2.00	1.10
1.95	1.158
1.90	1.222
1.85	1.294
1.80	1.375