SERIES 670 "DRAGON" DREDGE - TECHNICAL DATA AND SPECIFICATIONS

TECHNICAL DATA AND SPECIFICATIONS
670 Series "DRAGON" Model Specifications
Portable Dredge for any standard 12" or 14" (305-356 mm) pipeline. Nominal pump capacity range = 100-600 yds³/hr (460 m³/hr)

ELLICOTT DREDGES, POWER-PACKED PORTABILITY
The New "Value Engineered" Series 670: Design criteria focused on dependability and low cost with rapid dismantling, mobility, reassembling, and start-up; minimizing downtime and ensuring high productivity.

Representative digging depths and dimensions for average dredging service. Configurations for deeper digging readily available - consult Ellicott.

670 Principal Dimensions and Particulars
			Metric	English
GENERAL	Hull Length		15.24 m	50 ft.
	Length (with ladder raised)		21.18 m	69.5 ft.
	Hull Width Hull Depth		6.15 m 1.22 m	20.17 ft. 4 ft.
	Height (spuds installed and elevated)		10.82 m	35.5 ft.
	Height (Spuds, spud hoists, muffler and mast removed)		3.35 m	11 ft.
	Ladder Length		9.45 m	31.0 ft.
	Dry Weight (approximate)		56,245 kg	124,000 lbs.
	Center Tank Weight (complete with machinery)		34,000 kg	75,000 lbs
	Draft - Maximum with spuds installed & elevated		.81 m	2.67 ft.
	Fuel Storage Capacity		10,200 L	2,700 gal
DIGGING DEPTH	Maximum *()**		8.0 m	26 ft.
	Minimum		1.22 m	4 ft.
CHANNEL WIDTH	Maximum @ 40° Swing each side CL	@Min Digging Depth	27.4 m	90 ft.
		@Max Digging Depth	21.3 m	70 ft.
	Minimum @ Minimum Digging Dept (Hull Grounded)		19.8 m	65 ft.

PRIME MOVER	Diesel Engine CAT 3412 (continuous rating)	533 kw	715 HP
CUTTER	Cutting Force	2,722 kg	6,000 lbs
	Cutter Diameter	1,054 mm	41.5 in
	Cutter Shaft Diameter	116 mm	4.58 in
	Shaft Power	74.6 kw	100 HP
	Cutter Speed - Max.	0 - 40 RPM
DIRECT LINE SWING WINCHES	Line Pull - First Layer	4,763 kg	10,500 lbs
	Line Speed - First Layer	0-22.8 m/min	0-75 ft/min
	Wire Size	16.0 mm	5/8 in
	Drum Capacity	122 m	400 ft
SPUDS	Length	10.7 m	35 ft.
SPUDS	Diameter	406 mm	16 in.

(*) Deeper digging depths available upon request. Please consult with Ellicott.

OPTIONAL EQUIPMENT
Accessories and options can be offered and delivered with the Series 670 "DRAGON". Included are a choice of cutters, pump handling equipment, air conditioning or heating, production measuring equipment, and pipeline components.

ELLICOTT reserves the right to modify equipment in order to provide engineering improvements.

SPECIFICATIONS - "DRAGON" MODEL SERIES 670

HULL - Three tank design; quick connect/disconnect assembly; fuel oil storage and machinery in unitized center tank. Outboard pontoon tanks for flotation and ballast. Hull shell plate and stiffeners designed to ABS river rules.

MAIN DREDGE PUMP UNIT - Gear belt driven by heat exchanger cooled Caterpillar diesel engine with electric starter. Totally enclosed anti-friction radial and thrust bearings with impeller mounted on Acme threads. All wearing parts 500 BHN minimum chrome alloy cast iron. Choice of 12" or 14" (304 mm or 355 mm) discharge pipe diameters.

HYDRAULIC POWER PACKAGE - Tandem hydraulic gear pump direct driven off the main engine. Hydraulic system includes three independent operating circuits; one for swing winches, one for cutter, and one for spud and ladder hoists.

EXCAVATING MODULE AND LADDER - Cutter direct driven by high torque, radial piston hydraulic motor. Maximum cutter force available at all speeds. Underwater excavating module features short drive shaft with weight concentrated at the cutter for efficiency.

LADDER HOIST - Double acting hydraulic cylinder. Ram cylinder operation provides crowding action for tough digging.

POWER SWING WINCHES - Individual single direct line winches direct-driven by gear-type hydraulic motors through planetary reduction gear. Speed and reverse controls at operator's console. High torque, heavy-duty hydraulic motors provide constant line pull at variable speeds.

ELECTRICAL SYSTEM - 24 volt DC internal/external lighting and electrical system is powered by main diesel engine.

SPUDS AND SPUD HOIST - Heavy wall, cylindrical steel spuds mounted in spud keepers at stern. Spuds are hoisted by a sling operated from a hydraulic cylinder.

ASSEMBLY AND TRANSPORTATION - Assembly can be accomplished in 2 days provided all tools, site preparations and personnel are available. The disassembled Series 670 can be transported on three trucks.

WARRANTY - Ellicott warrants its equipment only in accordance with the printed warranty conditions which are normally included in our sales proposals, the latest copy of which will be forwarded promptly on written request. No other warranties are provided.

Note: Calculated output curves indicate pumping capability only. In actual practice the material varies from free flowing, easily excavated material to compacted and/or difficult excavations. When used for estimating actual outputs, the nature of the material must be considered. Consult Ellicott for other dredging conditions outside these curves.

Ellicott Dredges, LLC
Baltimore, Maryland U.S.A. 21230
Voice: (410) 625-0808 - Fax: (410) 545-0200
Email: Sales Department
www.dredge.com

BASED UPON
MATERIAL IN-SITU S.G.	2.10
SUCTION PIPE I.D.	14 in. (356 mm)
HULL DISCHARGE PIPE I.D.	12 in. (305 mm)
DISCHARGE PIPELINE I.D.	14 in. (356 mm)
PUMP IMPELLER	37 in. (940 mm)
MAX. PUMP SPEED	605 RPM
MAX. PUMP HP	560 HP (418 kW)
TERMINAL ELEV.	10 ft. (3.05 M)

CONVERSION FOR VARIOUS IN-SITU S.G.
S.G.	MULTIPLIER
2.10	1.00
2.00	1.10
1.95	1.158
1.90	1.222
1.85	1.294
1.80	1.375